Products
RF Repeaters
RF Repeaters solutions for mobile carriers
EMTS we provide a wide range of RF repeaters for improving in-building and outdoor coverage. In order to increase network coverage and reach the last mile.
RF repeaters provide cost-effective improvement in-building and outdoor coverage in places such as tunnels, buildings, basements, car parks, airports, rural areas, highways, railway stations, dense areas.
Services For RF repeater design solutions:
• Survey of existing coverage on site
• Type and power of repeater e.g.: single band, multi-band or fiber repeater.
• Antenna planning
• Link budget preparation
• Supplying the Repeaters and the ancillary equipment
In-Building Solutions (IBS)
EMTS offers in building solutions design for 2G/3G/4G/5G, iDEN, TETRA, and LMR networks.
The number of mobile users inside airports, railway stations, hotels, shopping centers, large corporate buildings, and basements has rapidly increased but network inside these places is often weak and may suffer from a coverage issue and a low data rate service, Good in-building coverage is provided by Distributed Antenna System.
This solution not only provides good coverage and capacity inside the building but also reduces the load on the outdoor cell site.
These solutions are based on Distributed Antenna Systems (DAS) - Passive or Active. We provide both solutions including passive elements or Fiber Optic Distribution Antenna Systems (F-DAS).
We offer RF business solutions for IBS:
• Identification of potential buildings for IBS
• Identify the coverage and capacity of the weak area in the buildings
• Propose best suitable RF solution to resolve the coverage problem
• Design Distributed Antenna system using passive and active.
• Supplying the DAS elements and the ancillary equipment
• LOS & Link Planning to connect site/repeater
• RF parameter planning for site/repeater
• RF walk test and call quality testing
• IBS solution fine-tuning for coverage, quality, and capacity
• Maintenance of IBS solution
450MHz Repeaters
- Comply with CDMA / WCDMA / LTE standards.
- Multiple types with composite output power from 20dBm to 40dBm.
- Intelligent design, with built-in ALC function & Oscillation Prevention.
- Automatic Level Control for tuning-free setup.
- Local or Remote management for Configurable and alarms.
- Designed specifically to answer the needs of 450MHz cellular systems.
700MHz LTE Repeaters
- Fully comply with LTE standard.
- Supports all combinations of the LTE700MHz.
- Provides Indoor / Outdoor coverage of the 700MHz band with Bandwidth of 1.4, 3, 5, 10, 15 or 20MHz selected by the GUI.
- Multiple types with composite output power from 20dBm to37dBm.
- Smart Automatic level Control(ALC)ensures stable and adjustable continuously output level.
- Local or Remote management for Configurable and alarms.
- Designed specifically to answer the needs of LTE700MHz cellular systems.
800 / 850MHz Japan Repeaters
- Comply with WCDMA and LTE standards.
- Multiple types with composite output power from 16dBm up to 37dBm.
- Automatic Level Control(ALC)ensures stable and adjustable continuously output level.
- Local or Remote management for Configurable and alarms.
- Designed specifically to answer the needs of Japan 800 and 850 MHz cellular systems.
EU LTE 800MHz Repeaters
- Comply with EU LTE standards
- Multiple types with composite Output power from 16dBm to 37dBm.
- Smart Automatic Level Control(ALC)ensures stable and adjustable continuouslyoutput level
- Local or Remote management for configuration and alarms
- Designed specifically to answer the needs of EU LTE 800MHzcellular systems
Cellular 850MHz Repeatersr
- Comply with GSM, CDMA, WCDMA and LTE standards.
- Multiple types with composite output power from 20dBm to 43dBm.
- Smart Automatic Level Control(ALC)ensures stable and adjustable continuously output level.
- Efficient thermal characteristics and robust design result in high system reliability.
- Local or Remote management for configuration and alarms.
- Designed specifically to answer the needs of Cellular 850MHz systems.
SMR 850MHz Repeaters
- Comply with iDEN and LTE standards.
- Multiple types with composite output power from 16dBm to 37dBm.
- Selectable bandwidth by the GUI to support any partial or full band applications.
- Smart Automatic Level Control(ALC)ensures stable and adjustable continuously output level.
- Efficient thermal characteristics and robust design result in high system reliability.
- Local or Remote management for configuration and alarms.
- Designed specifically to answer the needs of SMR 850MHz systems.
900 MHz Repeaters
- Comply with GSM, WCDMA and LTE ETSI and 3GPP requirements.
- Multiple types with composite Output power from 16dBm to 40dBm.
- Supports both GSM and EGSM band configurations.
- Smart Automatic Level Control(ALC)ensures stable and adjustable continuously output level.
- Efficient thermal characteristics, careful component selection and robust design result in high system reliability.
- Selectable bandwidth by the GUI to support any band configuration.
- Local or Remote management for configuration and alarms.
- Designed specifically to answer the needs of the 900MHz systems.
PDC 1500 MHz Japan
- Comply with WCDMA and LTE standards and meets Japan 1500MHz PDC standard.
- Multiple types with composite output power from 16dBm to 37dBm.
- Smart Automatic Level Control(ALC)ensures stable and adjustable continuously output level.
- Efficient thermal characteristics, careful component selection and robust design result in high system reliability.
- Local or Remote management for configuration and alarms.
- Designed specifically to answer the needs of the PDC 1500MHz systems.
AWS 1700MHz Repeaters
- Comply with WCDMA and LTE standards and meets AWS 1700MHz frequency band
- Multiple types with composite output power from 16dBm to 37dBm
- Smart Automatic Level Control(ALC)ensures stable and adjustable continuouslyoutput level
- Efficient thermal characteristics, careful component selection and robust design result in high system reliability
- Local or Remote management for configuration and alarms
- Designed specifically to answer the needs of the AWS1700 MHz systems
1700MHz Japan Repeaters
- Comply with WCDMA and LTE standards and meets Japan 1700 MHz requirements.
- Multiple types with composite output power from 20dBm to 37dBm
- Smart Automatic Level Control(ALC)ensures stable and adjustable continuouslyoutput level
- Efficient thermal characteristics, careful component selection and robust design result in high system reliability
- Local or Remote management for configuration and alarms
- Designed specifically to answer the needs of the Japan 1700MHz systems
DCS 1800MHz Repeaters
- Comply with GSM and LTE standards and meets ETSI and 3GPP requirements.
- Multiple types with composite output power from 20 up to 37dBm.
- Automatic Level Control (ALC) ensures stable and adjustable continuously output level.
- Efficient thermal characteristics and robust design result in high system reliability.
- Selectable bandwidth by the GUI to support to support any band configuration.
- Local / Remote management for configuration and alarms.
- Designed specifically to answer the needs of the DCS1800 MHz systems.
PCS 1900MHz Repeaters
- Comply with GSM, WCDMA and LTE standards and meets ETSI and 3GPP requirements
- Multiple types with composite output power from 16dBm to 40dBm.
- Selectable bandwidth by the GUI to support any block configuration.
- Smart Automatic Level Control(ALC)ensures stable and adjustable continuously output level
- Efficient thermal characteristics and robust design result in high system reliability.
- Local or Remote management for configuration and alarms.
- Designed specifically to answer the needs of the PCS1900 MHz systems.
UMTS 2100MHz Repeaters
- Comply with WCDMA and LTE standards and meets 2100MHz ETSI and 3GPP requirements.
- Multiple types with composite output power from 20dBm up to 37dBm.
- Selectable bandwidth by the GUI to support any block configuration.
- Smart Automatic Level Control(ALC)ensures stable and adjustable continuously output level
- Efficient thermal characteristics and robust design result in high system reliability.
- Local or Remote management for configuration and alarms.
- Designed specifically to answer the needs of the UMTS2100MHz systems.
LTE 2600MHz Repeaters
- Comply with LTE standards and meets LTE 2600MHz frequency band.
- Multiple types with composite Output power from 21dBm to37dBm.
- Smart Automatic Level Control(ALC)ensures stable and adjustable continuously output level
- Efficient thermal characteristics and robust design result in high system reliability.
- Local or Remote management for configuration and alarms.
- Designed specifically to answer the needs of the LTE 2600MHz systems.
850-1700MHz RF Repeaters
- Comply with Cellular 850MHz& AWS 1700MHz bands requirements, meets GSM, WCDMA and LTE ETSI and 3GPP standards.
- Multiple types with composite output power from 21dBm to 35dBm
- Low Noise figure&excellent linear RF performance
- Smart Automatic Level Control(ALC)ensures stable and adjustable continuously output level.
- Adjustable band with High selectivity for excellent out of band signal rejection.
- Efficient thermal characteristics and robust design result in high system reliability.
- Local or Remote management through a wireless modem.
- Isolation detection & oscillation suppression feature.
850-1800MHz RF Repeaters
- Comply with Cellular 850MHz&DCS 1800MHz bands requirements, meetsGSM, WCDMA and LTE ETSI and 3GPPStandards.
- Multiple types with composite output power from 21dBm to 35dBm.
- Low Noise figure&excellent linear RF performance.
- Smart Automatic Level Control(ALC)ensures stable and adjustable continuously output level.
- Selectable frequency band to support multi block configuration.
- Efficient thermal characteristics and robust design result in high system reliability.
- Local or Remote management through a wireless modem.
- Isolation detection & oscillation suppression feature.
850-1900MHz RF Repeaters
- Comply with Cellular 850MHz & PCS 1900MHz bands requirements, meets GSM, WCDMA and LTE ETSI and 3GPPStandards.
- Multiple types with composite output power from 21dBm to 35dBm.
- Low Noise figure&excellent linear RF performance.
- Smart Automatic Level Control(ALC)ensures stable and adjustable continuously output level.
- Selectable frequency band to support multi block configuration.
- Efficient thermal characteristics and robust design result in high system reliability.
- Local or Remote management through wireless modem.
- Isolation detection & oscillation suppression feature.
850-2100MHz RF Repeaters
- Comply with Cellular 850MHz & 2100MHz bands requirements, meets GSM, WCDMA and LTE ETSI and 3GPPStandards.
- Multiple types with composite output power from 21dBm to 35dBm.
- Low Noise figure&excellent linear RF performance.
- Smart Automatic Level Control(ALC)ensures stable and adjustable continuously output level
- Selectable frequency band to support multi- block configuration.
- Efficient thermal characteristics, careful component selection and robust design result in high system reliability.
- Local or Remote management through wireless modem.
- Isolation detection & oscillation suppression feature.
SMR 850MHz- AWS1700MHz
- Comply with iDEN 850MHz, LTE 850MHz& AWS 1700MHz bands requirements, meets iDEN, WCDMA and LTE Standards.
- Very high out of band rejection to avoid cross bands interferences.
- Multiple types with composite output power from 21dBm to 35dBm.
- Low Noise figure&excellent linear RF performance.
- Smart Automatic Level Control(ALC)ensures stable and adjustable continuously output level.
- Multiple block type to support iDEN and LTE at the same unit.
- Efficient thermal characteristics robust design result in high system reliability.
- Local or Remote management through wireless modem.
- Isolation detection & oscillation suppression feature.
900-1800MHz RF Repeaters
- Comply with 900MHz &DCS 1800MHz bands requirements, meets GSM, WCDMA and LTE ETSI and 3GPP Standards.
- Multiple types with composite output power from 21dBm to 35dBm.
- Low Noise figure&excellent linear RF performance
- Smart Automatic Level Control(ALC)ensures stable and adjustable continuously output level
- Selectable frequency band to support multi-block configuration.
- Efficient thermal characteristics, careful component selection and robust design result in high system reliability.
- Local or Remote management through a wireless modem.
- Isolation detection & oscillation suppression feature.
900 - 2100 MHz RF Repeaters
- Comply with 900MHz & 2100MHz bands requirements, meets GSM, WCDMA and LTE ETSI and 3GPPStandards
- Multiple types with composite output power from 21dBm to 35dBm
- Low Noise figure&excellent linear RF performance
- Smart Automatic Level Control(ALC)ensures stable and adjustablecontinuouslyoutput level
- Selectable frequency band to support multi block configuration
- Efficient thermal characteristics, careful component selection and robust design result in high system reliability
- Local or Remote management through wireless modem
- Isolation detection & oscillation suppression feature
1800-2100MHz RF Repeaters
- Comply with DCS1800MHz &2100MHz bands requirements, meets GSM, WCDMA and LTE ETSI and 3GPP Standards
- Very high out of band rejection to avoid cross bands interferences
- Multiple types with composite output power from 21dBm to 35dBm per band
- Low Noise figure&excellent linear RF performance
- Smart Automatic Level Control(ALC)ensures stable and adjustablecontinuouslyoutput level
- Adjustable band with High selectivity for excellent out of band signal rejection
- Efficient thermal characteristics, careful component selection and robust design result in high system reliability
- Local or Remote management through wireless modem
- Isolation detection & oscillation suppression feature
800-2100MHz RF Repeaters
800-1800-2600MHz RF Repeaters
- Comply with EU LTE 800MHz DCS 1800MHz and LTE 2600MHz bands requirements, meets GSM and LTE ETSI and 3GPP Standards.
- Very high out of band rejection to avoid cross bands interferences.
- Supports full or partial bandwidth.
- Multiple types with composite Output power from 24dBm to 30dBm per band.
- Low Noise figure & excellent linear RF performance.
- Smart Automatic Level Control(ALC)ensures stable and adjustable continuously output level
- Adjustable band with High selectivity for excellent out of band signal rejection.
- Efficient thermal characteristics, careful component selection and robust design result in high system reliability.
- Local or Remote management through a wireless modem.
- Isolation detection & oscillation suppression feature.
850-1700-1900MHz RF Repeater
- Comply with Cellular 850MHz, AWS 1700MHz and PCS 1900MHz bands requirements
- Meets GSM LTE ETSI and 3GPPStandards with 30dBm composite output power per band
- Very high out of band rejection to avoid cross bands interferences
- Supports full or partial bandwidth
- Low Noise figure&excellent linear RF performance
- Smart Automatic Level Control(ALC)ensures stable and adjustablecontinuouslyoutput level
- Adjustable band with High selectivity for excellent out of band signal rejection
- Efficient thermal characteristics, careful component selection and robust design result in high system reliability.
- Local or Remote management through wireless modem.
- Isolation detection &Oscillation suppression feature
850-1800-2100 MHz RF Repeaters
- Comply with Cellular 850, DCS 1800 and 2100 MHz bands requirements, meets GSM, WCDMA and LTE ETSI and 3GPP Standards
- Very high out of band rejection to avoid cross bands interferences
- Supports full or partial bandwidth
- Multiple types with composite Output power from 24dBm to 30dBm per band
- Low Noise figure&excellent linear RF performance
- Smart Automatic Level Control(ALC)ensures stable and adjustablecontinuouslyoutput level
- Adjustable band with High selectivity for excellent out of band signal rejection
- Efficient thermal characteristics, careful component selection and robust design result in high system reliability.
- Local or Remote management through wireless modem
- Isolation detection & oscillation suppression feature
900-1800-2100 MHz RF Repeaters
- Comply with 900MHz, DCS 1800MHz and 2100MHz bands requirements, meets GSM, WCDMA and LTE ETSI and 3GPP Standards
- Very high out of band rejection to avoid cross bands interferences
- Supports full or partial bandwidth
- Multiple types with composite output power from 24dBm to 40dBm per band
- Very low uplink noise - an excellent solution to extend BTS coverage range for Outdoor or In-Building deployments.
- Smart Automatic Level Control(ALC)ensures output level stable and adjustable continuously
- Adjustable band with high selectivity for excellent out of band signal rejection
- Efficient thermal characteristics, careful component selection and robust design result in high system reliability
- Local or Remote management through wireless modem
- Isolation detection & oscillation suppression feature