Download Datasheet (PDF)
The EMTS Telecom Services 24dBm Digital Mini Repeater (MR) provides an affordable solution for indoor signal coverage problems caused by the low signal level, signal feeding, and signal attenuation caused by architecture abstracts. It is easy to install and helps the carriers to solve coverage problems with minimal investment. The repeater works between the BTS and the mobile. It picks up the signal from BTS via a donor antenna, linearly amplifies it, and then retransmits via an indoor antenna. System to the weak, blind coverage area, the mobile amplified signals, and retransmitted to the BTS. Our commercial-grade indoor modular repeater supports 5G NR and is designed to meet ETSI standards; the 5G MR supports a TDD network using advanced signal synchronization technology. The 5GPR adds capacity and boosts network performance to stay ahead of the fast-moving 5G deployment path competition. IMOP Support (Isolation Measurement and Oscillation Protection).
Key Features
- Digital Off the air, 5G RF Repeater supports TDD, Allows fast network deployment
- Designed to comply with 5G standards ETSI TS 138 113 - V15.5.0 & ETSI TR 103 with 24dBm composite power
- Linear amplification effectively helped intermodulation and spurious emission
- Built-in 5G Dynamic TDD Sync Detection Module, Automatic completion of 5G wireless network, cell search, wireless signaling processing
- Smart Automatic Level Control (ALC) to ensure continuously adjusted output power
- Auto Isolation check between service and donor antennas, IMOP Support (Isolation Measurement and Oscillation Protection)
- Smart mode to auto-adjust Gain according to the isolation and receiving signal level
- Simple installation with external ac to dc adaptor (optional for IP67 enclosure)
- Optional for USB port link to a notebook for local supervision or IP Based NMS (Network Management System) that can remotely manage the repeater status and send an alarm
Technical Specifications
| Electrical Specifications |
|---|
| Items | Specifications |
|---|
| System | 5GNR TDD-3.5GHz |
|---|
| Frequency Range | Uplink: 3300 to 4100MHz / Downlink: 3300 to 4100MHz |
|---|
| Working Bandwidth | Any 100MHz (or 50MHz) Other bandwidth and bands between 3300-4100 |
|---|
| Maximum (Uplink) | 20±2dBm |
|---|
| Output Power |
|---|
| Downlink | 24±2dBm |
|---|
| Maximum Gain | Uplink: 60±3dB / Downlink: 70±3dB |
|---|
| AGC Range | ≥ 20dB |
|---|
| Spurious Emission | 9kHz~1GHz: ≤ -36dBm 1GHz~12.75GHz: ≤ -30dBm |
|---|
| EVM | ≤ 4.5% |
|---|
| VSWR | ≤2.0 |
|---|
| Noise Figure (Typical) | ≤ 6dB |
|---|
| Group Delay | ≤ 4.5μs |
|---|
| I/O Impedance | 50Ω |
|---|
| RF Connector | 2xN-Female |
|---|
| Power Supply | Input: AC100~ 240V (optional 12 V or DC) |
|---|
| Power Consumption | ≤25W |
|---|
| Dimensions | 188*265*68mm |
|---|
| Weight | ≤ 5 kg |
|---|
| Alarm Monitoring System | Alarm for Uplink Self-oscillation |
|---|
| Isolation Detection | Isolation Check During Boot-Time |
|---|
| wireless Networks. |
|---|
| Operating Temperature | -10 to +50 °C |
|---|
| Application | Standard IndoorIP30 / Optional Indoor or Outdoor IP67 |
|---|
| Relative Humidity Range | ≤95% (non-Condensing) |
|---|
| Mounting | Wall Mounting |
|---|
| 5G SA/NSA | Support |
|---|
| LED (Power & Alarm) | Normal: Green / Fail: Dark |
|---|
| Indication (5G) | Normal: Green / Alarm: Red |
|---|
| Remote monitoring and alarms | Via 4G modem (optional) |
|---|
| Networks. |
|---|
