Download Datasheet (PDF)
The EMTS Telecom Services 2300MHz Band Selective TDD Mini Repeaters (MR), supporting band- 40, provide an excellent solution to the problem of poor signal coverage for coverage extension and in building & outdoor applications. TDD communication uses one frequency for transmitting and receiving; LTE/5G TDD has several significant advantages, including significantly higher spectrum efficiency. Our TDD LTE/5G repeaters utilized advanced Frame Synchronization arithmetic, which grantee switching between the different time slots for uplink and downlink., The unit TDD sync module, which is the basis of the FPGA & DSP platform, will acquire the switch point between Uplink Pilot Time Slot (UPTS) and Downlink Pilot Time Slot (DPTS). The EMTS LTE/5G TDD Repeaters allow operators to exploit the full capabilities of LTE/5G services for powerful, versatile, and designed for network safety. The MR-2600 unit is the ideal solution for in, offices, restaurants, hotels, apartments, parking lots, etc., where initially blocked by structures and obstacles or coverage is limited. Operators are looking to extend their LTE/5G network's in-building or outdoor coverage. The EMTS LTE/5G Repeater family supports LTE/5G TDD or FDD networks at the bands 700, 800, 1800, 2100, 2300, and 2600MHz bands.
EMTS offers a comprehensive portfolio of enhanced coverage solutions for Wireless Networks, Based on advanced technologies, EMTS proven indoor and outdoor solutions solve a wide range of network issues, Networks.
Key Features
- Support single band LTE 2300 MHz TDD-LTE standard, fully comply with CE, ETSI, and 3GPP Standards with 23dBm composite power
- Built-in Base-band demodulation synchronization algorithm for TDD system to ensure accurate synchronization and eliminate interference to Donor BTS
- Built-in wireless modem for remote monitoring by SMS or cloud NMS
- Local interactive GUI interface for local control
- Adopting the DSP technique to archive ultra-far distance transmission
- Effectively Improved CINR / RSSI and Data Throughput
- IP 65 Housing
- Innovative Filtering technology to provide excellent signal selectivity and minimum time delay
Technical Specifications
| Technical Specification |
|---|
| Specifications |
|---|
| Downlink | Uplink |
|---|
| Frequency | 2300~2400MHz |
|---|
| Composite Output Power (+23 dBm) | +23 dBm |
|---|
| Operating Bandwidth | 100MHz Full band or digital band selective with up to 4 sub-bands |
|---|
| Channel Bandwidth | 20 MHz |
|---|
| Modulation Type | LTE -TDD |
|---|
| Out of band spurious | As per 3GPP standard |
|---|
| Gain (80dB) | 80dB |
|---|
| Gain flatness (±2 max) | ±2 max |
|---|
| Gain Adjust(1dB Step) (0~30dB) | 0~30dB |
|---|
| ALC Range (30dB) | 30dB |
|---|
| ALC Level (22~23dBm) | 22~23dBm |
|---|
| Sync detect Level (-90dBm min) | - |
|---|
| EVM | 5% max. |
|---|
| Frequency Stability | ±0.05ppm max. |
|---|
| VSWR | 1.5:1 max. 1.5:1 max. |
|---|
| Group Delay | 5usec max. 5usec max. |
|---|
| Noise Figure @ Max Gain | 8dB max |
|---|
| Up/Down Isolation check | 90dBc min 90dBc min |
|---|
| Control | Local Control with GUI |
|---|
| Remote monitoring (optional) | Via 4G modem |
|---|
| Power | AC 240V (50Hz) |
|---|
| Compliance Standards |
|---|
| Standard | Fully comply with ETSI Standards: Safety: EN 60950 EMC : ETSI 301 489-50, ETSI 301 489-1, Radio: ETSI 301 908-11, ETSI 301 908-15 5G: ETSI TS 138 106 |
|---|
| 3GPP Standards | TS 25.106, TS 36,106, TS 138.106 |
|---|
