Band 31 450MHz 30dBm ICS Power Repeater
The EMTS Telecom Services 450 MHz Band Selective ICS Power Repeaters (IPR), supporting band-31, provide an excellent solution to the problem of poor signal coverage for coverage extension and in building & outdoor applications. The IPR amplifies the signals from mobile phones and base stations and can be used in dead areas where coverage is poor. The EMTS IPR also improves cellular network capability by improving data coverage in areas with limited signal strengths. The IPR is connected to an outdoor donor antenna using a coaxial cable. The donor antenna transmits signals from mobile phones and receives signals from the BTS service antennas placed in dead zones or towers for outdoor applications. Signals from mobile phones used in the dead zones are then received by the service antenna and transmitted to the IPR donor antenna, which transmits the signals to the base station. The Repeater Advanced Adaptive Echo Interference Cancellation technology always provides optimized signal coverage. The special design allows fast network deployment, real-time isolation detection, and ICS operation, ICS (Interference Cancellation System) eliminating oscillation between Service and Donor Antennas using Digital Signal Processing.
Key Features
- 30dBm composite Downlink power meets LTE standards (Optional 5G)
- Advanced Adaptive Echo Interference Cancellation technology (ICS) for eliminating oscillation between Service and Donor Antennas
- Advanced GUI, Automatic Level Control for tuning free setup
- Compact size and High Performance at IP-65 enclosure for an outdoor installation, Low power consumption& sleeping mode (saving power)
- Local setting via USB cable
- Remote management for Configurable alarms using EMTS NMS (Network Monitoring System)
Technical Specifications
| Electrical Specification | |
|---|---|
| Uplink | Downlink |
| Frequency Range (452.5-457.5 MHz) | 462.5-467.5 MHz |
| Gain | 93dB +/-3dB |
| Composite output power (27dBm) | 30 dBm |
| Gain Control Range | 0-30dB |
| Out of Band (± 400 KHz) | ≥ 25 dBc |
| Rejection (± 600 KHz) | ≥ 35 dBc |
| ± 1 MHz | ≥ 40 dBc |
| ± 5 MHz | ≥ 50 dBc |
| Spurious Emission | In-band ≤36 dBm 9KHz – 1 GHz ≤ 36 dBm / 100 KHz 1 GHz – 12.75 GHz ≤ 30 dBm / 100 KHz |
| Intermodulation (9 KHz~1 GHz) | ≥ 45dBc / ≥ 36dBc |
| Products (1 GHz~12.75 GHz) | ≤ -30 dBm / ≤ -30 dBm |
| Noise Figure | 5 dB |
| EVM | 8% (optional 3.5%) |
| Operating Maximum Gain | ≥ Antenna Isolation + 10dB |
| Oscillation Protection | Using (ICS) Interference Cancellation System |
| Group Delay | 5 µ Sec. Maximum |
| Pass Band Ripple | 2 dB p-p |
| VSWR | 1.5:1 |
| Power Supply | 110-264/45-60 Hz VAC(optional -48vdc) |
| Power consumption | 120watts |
| RF Connector / Impedance | N female / 50 ohm |
| Size | Locked aluminum wall mount case 450×380×295 mm |
| Weight | 18 kg |
| Enclosure | IP65 Box ready for wall or poll mount installation |
| Work temperature | -30 º C to +55 º C |
| Enclosure cooling | Convection |
| Local setting | Using USB cable |
| Remote Management | Via Wireless LTE modem using EMTS NMS |
| MTBF | >100,000 hours |
| Conformance Standard | Safety: EN 60950, EMC: ETSI 301 489-50, ETSI 301 489-1, Radio: ETSI 301 908-11, ETSI 301 908-15 |
| 3GPP standards | TS 25.106, TS 36,106, TS 38.104 |
