ILB-1800-30W40 LTE 1800MHz Band 3 In-Line Amplifier
The EMTS Telecom Services LTE Band Selective in Line Booster (ILB) is integral to the LTE network deployment. It extends the coverage by receiving processes and amplifying the RF signal. The single-band LTE-1800 MHz ILB s 30dBm booster provides an affordable solution to solve indoor signal coverage problems in LTE 1800MHz systems. Due to signal fading and attenuation caused by architecture obstacles, the signal strength is weak; our ILB, with its easy installation & maintenance, can help carriers get a faster return. The ILB works as a relay between the BTS or pickup repeater and mobiles. It picks up the signal from BTS or the repeater via coaxial connections, linearly amplifies the signal, and then retransmits it via the Indoor Signal Distribution System to the weak/blind coverage area. The mobile signal is amplified and retransmitted to the BTS in the opposite direction. It provides two versions of a full band or a band selective fix band (factory set) type.
Key Features
- Fully comply with GSM-LTE standard supports the 1800 MHz band, fully comply with CE, ETSI, and 3GPP standards
- In-Line booster configuration, amplify both uplink and downlink path
- Low interference to BTS by adopting a linear amplifier with high gain and low noise
- Smart Automatic Level Control (ALC)ensures output level is stable and adjustable continuously
- Low power consumption with an optional sleeping mode (saving power)
- Linear power amplification with an extremely low EVM
- aluminum-alloy casing with IP65 protection has high resistance to dust, water, and corrosion
- An opportunity for remote monitoring and alarm using a 4G internal modem
Technical Specifications
| Technical Specifications | |
|---|---|
| System | DCS/LTE1800 |
| Working Frequency | Uplink: 1710-1785MHz / Downlink: 1805-1880MHz |
| Maximum Output Power | Uplink: -10±2dBm / Downlink: 30±2dBm |
| Maximum Gain (Maximum Gain) | 40±3dB |
| Maximum Gain | 40±3dB |
| Gain Adjustment Range | 0~25dB @ Step of 1dB |
| AGC | ≥10dB |
| Max Input Power (Uplink) | -10dBm |
| (Non-Destructive) | |
| Downlink | 10dBm |
| Spurious Emission | 9kHz~1GHz:≤-36dBm 1GHz~12.75GHz:≤-30dBm |
| EVM | ≤8% |
| VSWR | ≤1.5 |
| Noise Figure | ≤ 6dB |
| System Delay | ≤ 1.5μSec |
| I/O Impedance | 50Ω |
| RF Connector | 2XN-Female |
| Temperature Range | -25°C ~ + 55°C |
| Relative Humidity Range | 0 ~ 95% (Non Condensing) |
| Application | Indoor and Outdoor (IP65) |
| Installation Type | Wall Installation |
| Power Supply | 24VDC |
| Dimensions | 370*295*170 mm |
| Weight | ≤15kg |
| Local Control | Via UBS Interface and WiFi Hotspot office buildings, subways, tunnels, and shadowed areas. The EMTS coverage solution supports all major mobile technologies and standards of wireless Networks. |
