SKU: HPR-85S-40W90-TB
Tunable Bandwidth High Power Repeater (BDA)
Key Features
- Support 850 MHz– Analog, Digital, iDEN , TETRA and LTE
- Bi Directional configuration with 40dBm composite power
- High Selectivity & Low interference filtering technology
- Customized band selection function using tunable bandwidth mechanism
- Advance GUI – Gain, power and PA switch set by software
- High efficient RF amplification circuit, design for low power consumption
- Easy installation, Compact design at waterproof enclosure, suitable for outdoor and indoor deployments Our High Power Repeaters (BDA) Excellent filtering and noise rejection, suiting to provides an excellent solution to the sophisticated RF environment. problem of poor signal coverage. The Alarms on over power, over temperature, stationary wave and threshold Repeater amplifies the signals from mobile phones and base stations, and can be used in dead areas where service is poor. Typical installations are at outdoor environment or for large buildings. The Repeater is connected to an outdoor 'donor' antenna using a coaxial cable. The donor antenna transmits signals from mobile phones and receives signals from the BTS. Service antennas are placed in dead zones. Signals from mobile phones used in the dead zones are then received by the service antenna and transmitted to the Repeater donor antenna, which in turn transmits the signals to the base station. network lightweight Easy installation, challenges including design, interference and and oscillation problems, challenging coverage holes, rapid response easy usingcustomized make our coverage Signal Booster a that address any combination of unique and complex network needs for the Wireless solutions Networks. cost-effective and practical solution for extending signal coverage. Our 800 MHz Specifications Uplink Downlink Frequency Range 806 – 824 MHz 851 – 869 MHz Band Selection Tunable 1-18 MHz Center Frequency and bandwidth can be set by GUI Gain 90 +/- 3 dB Attenuation Range: 0-31 dB in steps of 1dB Gain Control Range 0-30dB Composite Output Power 30dBm min 40dBm min ALC range (Automatic Power Control) 25dB Min Noise Figure ≤4dB Group Delay 5µ Sec. Pass Band Ripple 3dB p-p VSWR 1.4:1 Power Supply AC 100-240 V, 50/60Hz Power consumption <200w Repeater Control Set or Read repeater parameters, Alarms and status using GUI from local PC/Laptop via RS232 cable or remotely Using GSM MODEM (optional) Manual Indicators / Controls 1. Green Led: Power 2. Red Led: Alarm 3. Manual gain adjustment screws 4. AGC UL, AGC DL on/off switch. Repeater Control interface (NMS) PC/Laptop via RS232 cable Size 500 x365x230mm Impedance 50 Ohms RF Connector N female Weight 35Kg Work temperature -20® to +55® Relative humidity ≤95% Enclosure IP65 For Outdoor condition Box ready for wall or pall mount installation Ordering information: Use Model No: HPR-800SMR-40W90-TB For any special requirements such as extended bandwidth, DC power supply please contact factory . standards of wireless Networks
