Band 20 800MHz 20dBm Band Selective Mini Repeater
The EMTS Telecom Services LTE/5G Band Selective Mini-Repeater is integral to the LTE/5G network deployment. It extends the coverage by receiving processes and amplifying the RF signal. The single-band LTE/5G 800 MHz is a 20dBm mini-Repeater providing an affordable solution to the indoor signal coverage problems in LTE/5G 800MHz systems. Due to signal fading and attenuation caused by architecture obstacles, the signal strength is weak; our mini- Repeater and its easy installation & maintenance can help carriers get a faster return.The Repeater works as a relay between the BTS and mobiles. It picks up the strongest signal from BTS via the Donor Antenna, linearly amplifies it, and then retransmits it via the Indoor Signal Distribution System to the weak/blind coverage area. The mobile signal is also amplified and retransmitted to the BTS in the opposite direction. It provides two versions of tunable band selective and fix band (factory set) types. The band-selective function can choose to amplify the signal within the customized band.
technologies. EMTS proven indoor and outdoor solutions solve a wide range of network challenges, including interference and complex network needs for Wireless Networks.
Key Features
- Fully comply with LTE and 5G ETSI and 3GPP standards
- User-friendly front panel control, plug & play installation – the repeater status can be known during installation
- Smart function can be activated via the front panel, preventing UL interference and self-oscillation and automatically keeping optimal conditions
- Isolation detection function – Auto Isolation check between service and donor antennas to eliminate the self-oscillation.Smart Automatic Level Control (ALC) ensures output level is stable and adjustablecontinuously
- Low power consumption with an optional sleeping mode (saving power)
- Linear power amplification with an extremely low EVM and an option supporting 5G
- An optional digital module supporting multiple sub-bands 5,10,20,25MHz per block
- Simple installation with an external AC/DC adapter
- An opportunity for remote monitoring and alarm using a 4G internal modem
Technical Specifications
| Technical Specifications | |
|---|---|
| Items | Specifications |
| System | LTE800 (5G optional) |
| Frequency Range | Uplink: 832 – 862 MHz (Fixed band – factory set or digital band selective) / Downlink: 791 -821 MHz (Fixed band – factory set or digital band selective) |
| Output Power | Uplink: 20dBm / Downlink: 20dBm |
| Gain | Uplink: 85±3dB / Downlink: 85±3dB |
| AGC&MGC Range | ≥20dB |
| In-Band Ripple | ≤±2dB |
| Noise Figure | ≤6dB |
| VSWR | ≤2.0 |
| Maximum Input Power | 0dBm |
| System Delay | ≤5μs |
| I/O Impedance | 50 Ω |
| Spurious Emission | 9kHz~1GHz: ≤ -36dBm 1GHz~12.75GHz: ≤-30dBm |
| EVM | ≤8% An option for 5G with 4.5% EVM |
| RF Connector | N-Type (Female) |
| Power Supply | Input AC100~ 240V |
| Dimensions | Indoor type 184X150X40mm |
| Weight | ≤3kg |
| Application | Indoor |
| Alarm Monitoring System | Alarm for Uplink Self-Oscillation |
| Isolation Detection | Isolation Check During Boot-Time |
| LED Indicator | Power Supply, Alarm, State |
| Operating Temperature | -20 to +45 °C |
| Relative Humidity Range | ≤95% (No Condensing) |
| MTBF | ≥ 100,000 hours office buildings, subways, tunnels, and shadowed areas. The EMTS coverage solution supports all major mobile technologies and standards of wireless Networks. |
| Compliance Standards | |
| Standard | Fully comply with ETSI Standards: Safety: EN 60950 EMC : ETSI 301 489-50, ETSI 301 489-1, Radio: ETSI 301 908-11, ETSI 301 908-15 5G: ETSI TS 138 106 |
| 3GPP Standards | TS 25.106, TS 36,106, TS 138.106 technologies. EMTS proven indoor and outdoor solutions solve a wide range of network challenges, including interference and |
| complex network needs for Wireless Networks. | |
