Band 4 1700MHz 37dBm Tunable Bandwidth High Power Repeater
The EMTS Telecom Services Ltd. 1700 MHz AWS Band, 37dBm carrier-grade High Power Repeater (HMR) provide an excellent solution to the problem of poor signal coverage. The HPR is a Single Band Dual Technology High Power Repeater. it maximizes the subscriber’s indoor or outdoor wireless experience by eliminating in-building or outdoor dead zones. It is a real cost-effective and intelligent solution to solve the last mile coverage problem, which is advance technology, The frequency of our HPR can be set by the GUI defining bandwidth and Center frequency. the HPR is very cost-effective and practical solution for extending signal coverage. The AFC/ALC intelligently and automatically senses and adapts to its dynamic RF environment, by continuously monitoring the gain and making real-time adjustments. The system will never overdrive the base station or raise the noise floor. ALC/AFC architecture enables to delivery significantly improving network coverage with very low power consumption.
in-building coverage. Regardless of the technology or frequency, EMTS can provide customized coverage solutions that address any combination of unique and complex network needs for the Wireless Networks.
Key Features
- 37dBm downlink composite power
- Meets, LTE and WCDMA standards
- Fully comply with the ETSI and 3GPP requirements
- Advanced GUI, very easy to use and install, Adjustable bandwidth
- High Performance at waterproof enclosure suitable for outdoor and indoor deployments, Advanced MCPA technology guarantee high linearity with low consumption power
- Metal cavity filter technology, allows wider receive and transmit separation, better gain flatness, higher stability and lower noise figure
- Intelligent design with built-in ALC function provides auto amplitude fixing
Technical Specifications
| Electrical Specification | |
|---|---|
| Uplink | Downlink |
| Frequency Range (Type I) | 1710 – 1755 MHz / 2110 – 2155 MHz |
| Type II (1710 – 1770 MHz) | 2110 – 2170 MHz |
| Bandwidth | Factory set or adjustable bandwidth types |
| Maximum Gain (90dB) | 90dB |
| Frequency Error | ≤±0.5ppm |
| AGC Control Range | 20 dB@1dB/Step |
| Gain Control Range | 0 to 30dB |
| RF Output Power (30dBm) | 37 dBm |
| Noise Figure | ≤5dB |
| Group Delay (Fixed Bandwidth,) | ≤5us |
| Adjustable Bandwidth, | ≤8us |
| In band Flatness | +/- 1.5 dB max |
| Intermodulation (In-band Intermodulation) | Complies with ETSI |
| attenuation (Out of band) | ≤-36dBm/30KHz@9KHz-1GHz |
| (0ff 2.5MHz) | ≤-30dBm/[email protected] |
| Out of band Rejection ( Channel Selective) | ≤-30dBc/30kHz@±200kHz ≤-60dBc/30kHz@±400kHz |
| Spurious emission | ≤-36dBm/30KHz@9KHz-1GHz ≤-30dBm/[email protected] |
| VSWR | ≤1.5:1 typical |
| Power Supply | 110VAC/220VAC |
| Power Consumption | ≤200 watts |
| Size | 550 x 400 x 230 mm |
| Weight | 40Kg |
| Operating temperature | -20º to +55℃ |
| Relative humidity | ≤95% |
| Operation Configuration | LCD Display, Manual Key-press, PC USB Port, or wireless modem |
| Conformance Standard | ETSI TS 125 143 V13.0.0 (2016) ETSI EN 300 609-4, GSM11.26, 3GPP TS 25.106 |
| Ordering information | |
| Model no.: HPR-1700A-37W90-X | |
| X = number of adjustable blocks – can be 1 or 2 | |
| wireless Networks. | |
