SKU: PR-T26-30W85

Band 41 2600MHz 30dBm TDD Power Repeater

Download Datasheet (PDF)

The EMTS Telecom Services 2600MHz Band Selective TDD Power Repeaters (PR), supporting band- 41, provide an excellent solution to the problem of poor signal coverage for coverage extension and in building & outdoor applications. TDD communication uses one frequency for transmitting and receiving; LTE/5G TDD has several significant advantages, including significantly higher spectrum efficiency. Our TDD LTE/5G repeaters utilized advanced Frame Synchronization arithmetic, which grantee switching between the different time slots for uplink and downlink., The unit TDD sync module, which is the basis of the FPGA & DSP platform, will acquire the switch point between Uplink Pilot Time Slot (UPTS) and Downlink Pilot Time Slot (DPTS), the EMTS LTE/5G TDD Repeaters allow operators to exploit the full capabilities of LTE/5G services for powerful, versatile, and designed for network safety. The PR-2600 unit is the ideal solution for in, offices, restaurants, hotels, apartments, parking lots, etc., where initially blocked by structures and obstacles or coverage is limited. Operators are looking to extend their LTE/5G network's in-building or outdoor coverage. The EMTS LTE/5G Repeater family supports LTE/5G TDD or FDD networks at the bands 700, 800, 1800, 2100, 2300, and 2600MHz bands.

EMTS offers a comprehensive portfolio of enhanced coverage solutions for Wireless Networks, Based on advanced technologies, EMTS’s proven indoor and outdoor solutions solve a wide range of network issues, Networks.

Key Features

  • Support single band LTE/5G 2600MHz TDD-LTE/5G standard
  • Fully comply with CE, ETSI, and 3GPP Standards with 30dBm composite power
  • Built-in Base-band demodulation synchronization algorithm for TDD system to ensure accurate synchronization and eliminate interference to Donor BTS
  • Built-in wireless modem for remote monitoring by SMS or cloud NMS
  • Local interactive GUI interface for local control
  • Adopting advanced DSP technique to archive ultra-far distance transmission
  • Effectively Improved CINR/RSSI and Data Throughput
  • IP65 Housing
  • Innovative Filtering technology to provide excellent signal selectivity and minimum time delay
Technical Specifications
Technical Specification
Downlink Uplink
Frequency 2496 – 2690 MHz
Composite Output Power (+30dBm) +24 dBm
Operating Bandwidth Digital band selective with up to 4 sub-bands
Modulation Type LTE/5G -TDD
Out-of-band spurious As per 3GPP standard
Gain (85 +/-3 dB) 85 +/-3dB
Gain flatness (±2 max) ±2 max
Gain Adjust (1dB Step) (0~30dB) 0~30dB
ALC Range (30dB) 30dB
Sync detect Level (-90dBm min) –
EVM 3.5%
Frequency Stability ±0.05ppm max.
VSWR 1.5:1 max. 1.5:1 max.
Group Delay 5usec max. 5usec max.
Noise Figure @ Max Gain 6dB max
Up/Down Isolation check 100dBc min 90dBc min
Control Local Control with GUI
Local setting Via RJ45 connectivity
Remote Monitoring & Control (optional) Via 4G modem
Size 410x300x150 cm
Weight ≤14kg
Operating Temperature -25 ~ +55 °C
Application Indoor or Outdoor (IP65)
Power AC 240V (50Hz)
Compliance Standards
Standard Fully comply with ETSI Standards: Safety: EN 60950 EMC : ETSI 301 489-50, ETSI 301 489-1, Radio: ETSI TS 125 143 5G: ETSI TS 138 106
3GPP Standards TS 38.101, TS 38.106, TS 38.115

Related Products

DHPR-91821-43W90-5G-ASG High Power Digital Repeater Features:

Band 1 + Band 3 + Band 8 900/1800/2100MHz 43dBm Digital High Power Repeater

DPR-91821-30W95 30dBm 900-1800-2100MHz ICS Tri-Band Digital Power Repeater

Band 1 + Band 3 + Band 8 900/1800/2100MHz 30dBm ICS Digital Repeater

DMR-91821-20W90 Digital Mini Repeater 20dBm 900-1800-2100MHz

Band 1 + Band 3 + Band 8 900/1800/2100MHz 20dBm Digital Mini Repeater