5G n77, n78 3.3-4.2 GHz 10W Multi-Carrier Solid State Power Amplifier
The EMTS Telecom Services Ltd. MCPA-3750-40W50 is a wideband multi-carrier power amplifier designed for LTE-Advanced and 5G NR TDD radio systems operating across the 3.3 to 4.2 GHz frequency range, covering 3GPP NR band n77 and the n78 frequency range. The amplifier employs an advanced wideband Doherty architecture and high-linearity RF power devices to provide high gain, efficient operation at output-power back-off, low distortion, and stable amplitude and phase performance across the operating band. The MCPA is engineered to amplify high-PAPR, multi-carrier OFDM waveforms and is optimized for use with digital predistortion, DPD, to achieve low Error Vector Magnitude, EVM, and Adjacent Channel Leakage Ratio, ACLR, under demanding LTE and 5G NR operating conditions. Fast transmit enable and disable switching supports TDD operation. The rugged machined enclosure, integrated EMI/RFI filtering, qualified components, advanced thermal management, and protection circuitry provide stable and reliable operation over an ambient wide temperature range. The MCPA-3750-40W50 is suitable for 5G NR and LTE-Advanced base- station transmitters, RF repeaters, distributed antenna systems, DAS, and other high-linearity RF infrastructure application
EMTS Telecom Services Ltd. offers a comprehensive portfolio of enhanced coverage solutions for the Wireless Networks, based on advancedtechnologies, EMTS’s proven, indoor and outdoor solutions solve a complex network needs for the Wireless Networks.
Key Features
- Supports LTE-TDD and 5G NR signals in the 3.3-4.2 GHz band
- Designed to support applicable 3GPP and ETSI requirements
- Supports TDD operation with uplink and downlink paths
- Solid-state, high-linearity, multi-carrier design
- High efficiency, reliability, and rugged construction
- Built-in control, monitoring, alarm, and protection circuits
- Stable RF performance over a wide temperature range
- Field-proven reliability
Technical Specifications
| Technical Specification | |
|---|---|
| Frequency range(MHz) | 3300-4200MHz |
| Maximum input power(dBm) | UL: ≤-10dBm /DL:≤10dBm |
| Output power Pmax(dBm) | UL:-5±2dBm /DL:40±2dBm |
| Signal mode | LTE / 5G |
| ACPR@PAR=8 (dBC)/LTE20M | UL:≤-45Dbc/ DL:≤-30Dbc |
| Gain(dB) | UL:35±3 dB /DL:50±3 dB |
| EVM@ Po= 40 of PAR=8 /LTE20M | ≤5.5% |
| Passband Ripple(dB) | ∆GP≤5dB |
| ALC control range(dB) | ≥25dB |
| ATT range(dB) | ≥25dB |
| Port VSWR | ≤1.5 |
| Power amplifier switch | Have |
| Input power detection(dBm) | -20 dBm~10 dBm |
| Output power detection(dBm) | 10dBm~45dBm |
| Reflected power detection(dBm) | 5dBm~40dBm |
| Fault alarm | Have |
| VSWR alarm | Have |
| Temperature detection (℃) | -40 to 85℃ |
| Working voltage (VDC) | 28VDC |
| Static working current (A) | ≤2A |
| Dynamic working current(A) | ≤3.0A@ Po=40dBm |
| Operating temperature range(℃) | -40 to 85℃ |
| Monitoring interface | |
| Power Supply Connector | KF128-5.08-2P PIN Define |
| Size (mm) | 160x110x21,7 mm- EMTS Telecom Services is a leading supplier of high-quality RF coverage solutions designed to maximize EMTS Telecom Services Ltd. offers a comprehensive portfolio of enhanced coverage solutions for the Wireless Networks, based on advancedtechnologies, EMTS’s proven, indoor and outdoor solutions solve a |
| complex network needs for the Wireless Networks. | |
