SKU: FRU-T35-23W10

5GNR TDD Band N78 Fiber DAS Remote Unit

Download Datasheet (PDF)

The EMTS Telecom Services Ltd. F/O DAS solution provides an affordable solution for multi-operator 5G indoor signal coverage problems for multi-operator deployment. The Master Unit (MU) is based on POI, Attenuator box, and Fiber Conversion Box Unit (FCB). One Master Unit (MU) is connected to 2 Extension Units (EU). Each EU is connected to 8 Fiber Remote Units (FRU) via fiber optic cables. The gNB RF signals of all 4 operators are fed to the 5G POI. The POI combines all 4 operators into 4 MIMO streams. The combined RF signal is attenuated using an attenuator box and fed into the FCB. The MU converts the RF signal to an optical signal, 1 signal per MIMO stream. The optical signal is connected to the Extension Unit (EU) through F/O cables. One MU supports 2 EU. The EU splits the optical signal from the MU into 8 optical signals for the fiber Remote Unit (RU) via fiber optic cable. The fiber RU will reconvert the optical signal into an RF signal and provide the signal to the areas where network coverage is inadequate. The mobile signal is also amplified and retransmitted to the BTS via the opposite direction. The EMTS 5G Fiber Optic Repeater system is designed to support MIMO 4X4 topology. The EMTS Telecom Services 5G DAS solutions boost network performance to stay ahead of the fast-moving 5G multi-operator deployments & get a fast ROI simultaneously.

areas, office buildings, subways, tunnels, and shadowed areas. The EMTS Telecom Services coverage solution

Key Features

  • 5G RF Extension 4 x4 MIMO system supports TDD technology
  • Allows fast 5G NR network deployment
  • Designed to comply with ETSI 3GPP TS 38.106
  • Supports NSA (Non-Standalone) and SA (Standalone) 5G network
  • One Master Unit can support 2 Extension Units (EU), and One EU can support Up to 8 Fiber Remote Units (FRU) to maximize the utilization of fiber optical cable (a star topology is formed between EU and FRUs)
  • Composite cable plug and play, remote power supply
  • Built-in Antenna, easy installation, easy maintenance
  • Can be managed through EMTS OMT/NMS
Technical Specifications
Electrical Specification
Item Specifications
Supported Bandwidth 270MHz
Frequency Range 3300~3570MHz
Frequency Stability (+/-0.01ppm) ≦0.01ppm
Signal Mode(Analog/Digital) Analog
Support 4X4 MIMO YES
Max Conducted Output Power @ ≥23dBm
Bandwidth(dBm)
Optical Output Power 3±2dBm@1310nm
Max Gain @ DL/UL 31±2dB
Antenna Antenna Integrated (Omni)
Antenna Gain ≥2dBi
Gain Flatness ≦±3dB
AGC/ALC Function Supported
ALC Range ≥10dB
Gain Adjustment Range 0~15dB/Step 1dB
ACLR 3GPP TS 38.106 / 45dB
Noise Figure@ Max.Gain(UL) ≦ 8dB
Gain Flatness ≦±3dB
Optical Receiver Sensitivity -12dBm
Maximum Input Power(Non-Destructive) -10dBm
Input VSWR ≦ 2.0
Spurious and Emission 3GPP TS 38.106, Category A -13dBm
Intermodulation 3GPP TS 38.106, <30dBm
Out of Band Gain 3GPP TS 38.106, Per the standard
EVM 3GPP TS 38.106, < 3% @ 256 QAM
Group(System) Delay (μs): MU->EU->RU ≦1.5us
Ingress Protection IP65(Outdoor)/IP30(Indoor)
Cool Function Heat Sink
Local Monitoring Interface Via USB and WiFi Hotspot
Remote Monitoring Interface Through MU via Fiber Optical Cable
Output RF Connector Type 4.3-10 Female
Antenna Built-In 4*4 MIMO Antenna
Room Operating Temperature -10 to +45°C
Operating Humidity ≦95%
Item Specifications 200mm×200mm×80mm @ IP30
Dimension(H x W xD)(mm)
Weight (Kg)
Mounting Type Celling, Wall or Pole
Power Supply 40 ~ 56 VDC areas, office buildings, subways, tunnels, and shadowed areas. The EMTS Telecom Services coverage solution System Architecture

Related Products

DHPR-91821-43W90-5G-ASG High Power Digital Repeater Features:

Band 1 + Band 3 + Band 8 900/1800/2100MHz 43dBm Digital High Power Repeater

DPR-91821-30W95 30dBm 900-1800-2100MHz ICS Tri-Band Digital Power Repeater

Band 1 + Band 3 + Band 8 900/1800/2100MHz 30dBm ICS Digital Repeater

DMR-91821-20W90 Digital Mini Repeater 20dBm 900-1800-2100MHz

Band 1 + Band 3 + Band 8 900/1800/2100MHz 20dBm Digital Mini Repeater