ILB-150-33W40 High Performances 30dBm TDD n78 3300-3800MHz
The EMTS n78 In-Line Booster (ILB) offers a robust solution to mitigate insertion losses from passive components and transmission losses in feeder cables, particularly in indoor distribution systems and tunnel coverage scenarios. By deploying the ILB, n78 operators can effectively expand the service area of a BTS/gNB or 5G Repeater, offsetting feeder losses through signal amplification along coaxial or leaky cables utilizing Advanced Bi- Directional Technology.
The ILB's lightweight design, straightforward installation process, and user-friendly GUI enhance ease of deployment and operation. This solution is a cost-effective and practical option for improving signal coverage in areas with limited n78 network reach, such as buildings, shopping centers, airports, and tunnels. The ILB seamlessly integrates into passive Distributed Antenna Systems (DAS) via coaxial cable connections, offering a wide range of configuration options to meet diverse customer requirements.
Key Features
- Signal enhancement enhances signal strength in areas with weak coverage, improving connectivity for devices operating within this TDD frequency range
- Optimized for Indoor and Tunnel Coverage Designed for indoor distribution systems and tunnels
- Connected to a DAS from BTS/gNB or 5G Repeater Employs TDD amplification to ensure signal integrity
- TDD synchronization mechanism ensures seamless time alignment between uplink and downlink signals, preventing interference and optimizing spectrum efficiency in time-division duplex communication,
- Built-in 5G Dynamic TDD Sync Detection Module automatic completion of 5G wireless network cell search and wireless signaling processing
- Comply with standards Fully comply with 3GPP, ETSI and CE with 30dBm downlink power
- Rapid RF Coverage Expansion Enables quick deployment of RF coverage within an n78 network
- Compact and Robust Design High-performance, waterproof enclosure suitable for indoor/ outdoor
- Customized frequency Band Input-output filters to support the n78 operator band
- Flexible Connectivity Equipped with Wi-Fi or RJ45 port options for local monitoring, remote management through the built-in wireless modem, interfacing with the NMS
Technical Specifications
| Technical Specifications | |
|---|---|
| Electrical Specifications | |
| System/Technology | 5GNR N78 |
| Frequency Range (Uplink (Rx)) | 3300 to 3800 MHz |
| (Customized) | |
| Downlink (Tx) | 3300 to 3800 MHz |
| Composite Output Power (Uplink (Rx)) | -10±2dBm |
| Downlink (Tx) | 30±2dBm |
| Maximum Gain | 40±3dB |
| Gain Adjustment Range | 0 to 20dB |
| AGC Range | ≥10dB |
| Noise Figure | ≤ 5dB |
| Spurious Emission | 9kHz to 1GHz: ≤ -36dBm 1GHz to 12.75GHz: ≤ -30dBm |
| EVM | ≤ 3.5% |
| VSWR | ≤ 1.5 |
| System Delay | ≤ 1.5μs |
| Maximum Input Power | 10dBm |
| I/O Impedance | 50 Ω |
| RF Connector | 2*4.3-10 Female (One Input Port and One Output Port) |
| Power Supply | 110 to 220VAC ±15% 50-60Hz / 50 Watts Optional 24 Vdc or -48 Vdc |
| Mechanical Specifications | |
| Dimensions | 370*295*152mm |
| Weight | ≤ 12kg |
| Mounting | Wall Mounting |
| Environmental Specifications | |
| Operating Temperature | -20 to +50 °C |
| Application | Indoor & Outdoor (IP65) |
| Relative Humidity | 5% to 95% |
| MTBF | ≥ 100,000 Hours |
| Connection | |
| LED Indicator | Power Supply, Running, Alarm |
| Local Control | Via USB Interface |
| NMS Mode | Cloud NMS through Built-in 4G Wireless Modem |
| Comply with standards | |
| Standard | Fully comply with ETSI & 3GPP Standards: Safety: EN 60950 EMC: 3GPP TS 38.114 Rado: ETSI TS 138 106, titled "5G; NR repeater radio transmission and reception |
| CE | Comply with CE Requirements |
